Super Free Match
Service Manual
MAINTENANCE
160
◆ Remove air deflecting plate modules
Steps Illustrations Operation Instructions
Remove sub-assy of
air deflecting plate
Remove the air deflecting
plates from the air deflecting
plate support assembly, and
then remove both ends from
the air sweeping motor. joint
(As is shown in the graph,
arrow represents the support
assembly and circle the air
sweeping motor joint.)
◆ Remove the water tray
Steps Illustrations Operation Instructions
Remove the water
tray
Remove the water tray
◆ Remove the evaporator
Steps Illustrations Operation Instructions
Remove the
evaporator
Remove the screws as
shown by the arrow in the
graph (There are 6 screws
on left and right of the
evaporator and 5 on
evaporator outlet press
plate modules)
To Next Page
Loading...