U-Match Series Service Manual
92
Disassembly of water-containing plate
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during
disassembly.
1. Disassembly of cover
plate
Disassemble the fastening
screws on the cover plate
and remove the cover plate.
(As is shown in the graph,
circle represents 6 fastening
screws under the cover plate
and the box represents two
fastening screws on
water-containing plate
symmetrically arranged both
on left and right.)
2. Disassembly of
water-containing plate
Disassemble the fastening
screws on the
water-containing plate, pull
upward and remove the
water-containing plate.
Disassembled
water-containing plate is
shown in the graph.
Disassembly of fan and motor
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during
disassembly.
Disassemble the fixing
screws on the fan
components. (As is shown in
Graph 10, circle represents 6
screws.)
Disassemble the fastening
screws on the fan and motor.
Remove the fan. (As is
shown in Graph 11, box
represents screws.)
To Next Page
Loading...
