Gree GKH30K3HI - Installation of the Outdoor Unit

Cassette Type Air Conditioner Unit
12
60 to 70mm(2-3/8 to 2-3/4inch)
φ12.7mm(1/2inch)
Drilling position for bolts
Fig. 4.4 Fig. 4.5 Fig. 4.6
4.1.4 Leveling
The water level test must be done after installing the indoor unit to make the unit is
horizontal, as shown below.
Horizontal tester
Fig. 4.7
4.2 Installation of the Outdoor Unit
WARNING
①. Install the unit where it will not be tilted by more than 5°.
②. During installation, if the outdoor unit has to be exposed to strong wind, it must be fixed securely.