Gree GKH42K3FI - Page 140

U-Match Series DC Inverter Service Manual
137
5. Loosen the screws
fixing the motor
Use screwdriver to loosen
the screws fixing the motor
6. Remove the motor
and replace it
Remove the motor and
replace it
7. Tighten the screws
fixing the motor
Use screwdriver to tighten
the screws fixing the motor.
8. Mount the fan and
tighten the fixing bolts
Mount the fan and use
spanner to tighten the bolts
fixing the fan.
9. Mount the water
tray and tighten the
screws
Use screwdriver to loosen
the screws fixing the water
tray
Removal and Installation of Drainage Pump
Step
Illustration
Handling Instruction
1. Loosen the screws
fixing the water tray
Use screwdriver to loosen
the screws fixing the water
tray