Gree GKH42K3FI - Page 141

U-Match Series DC Inverter Service Manual
138
2. Remove the water
tray
Remove the water pump
and replace it.
3. Pull out the water
outlet pipe and loosen
the screws fixing the
water pump.
Pull out the water outlet
pipe and use screwdriver
to loosen the screws fixing
the water pump.
4. Take out the pump
and replace it
Take out the pump and
replace it
5. Connect the
drainage pipe and
tighten the screws
fixing the water pump.
Connect the drainage pipe
and use screwdriver to
tighten the screws fixing
the water pump.
6. Mount the water
tray and tighten the
screws
Use screwdriver to loosen
the screws fixing the water
tray