Gree GKH42K3FI - Page 145

U-Match Series DC Inverter Service Manual
142
 Model: GTH09K3FI~GTH24K3FI, GTH48K3FI, GTH60K3FI
Disassembly of panel grating module
Remark: Make sure that the power supply is cut off before disassembling and protect all the
parts during disassembly. Do not put filter screen near the high temperature heat source.
Step
Illustration
Handling Instruction
Disassembly of
sub-assy of front
grill
●Unscrew the 2 clasps
of the upper grill and
the 2 screws of the
clasps.
●Open the grill,
disassemble the 2
down clasps to remove
the grill
Disassembly of right and left finishing plates
Remark: Make sure the power supply is cut off before disassembling and protect all the parts
during disassembly. Do not scratch the outer parts.
Step
Illustration
Handling Instruction
Disassembly of right
and left finishing
plates
●Disassemble the
screws as shown in the
graph with screwdriver
and then push upward
to remove the right and
left finishing plates.(As
is shown in the graph,
arrow represents the
position of screws.)
Disassembly of panel parts
Remark: Make sure the power supply is cut off before disassembling and protect all the parts
during disassembly. Do not scratch the outer parts.
Step
Illustration
Handling Instruction
Disassembly of
panel parts
●Unscrew the 3 sides‟
screws on the cover to
remove the cover.
Disassembly of sub-assy of electric box
Remark: Make sure that the power supply is cut off before disassembling and protect all the
parts during disassembly, especially the components inside the box in case of water and hit.
Step
Illustration
Handling Instruction
1. Disassembly of
electric box cover
●Disassemble 3 screws
as shown by the arrow
in the graph on left and
remove the electric box
cover.