GMV5 DC INVERTER VRF UNITS SERVICE MANUAL
261
During debugging, if you click ―Stop‖, the debug is interrupted. Click ―Start‖ to continue debug. When
debug goes on to step 10 ―ODU Valves Check Before Startup‖, ―Back‖ and ―Skip‖ are available. If this
step fails, you can go back to step 9. Click ―OK‖ of step 9 to continue step 10. If the failure is U6 fault
(valve exception alarm), click ―Skip‖ to skip this step. For other fault causes, this button is greyed out.
To Next Page
Loading...
