GMV5 DC INVERTER VRF UNITS SERVICE MANUAL
128
Communication failure between indoor and
ODUs and IDU's communicator
Communication failure between control board
and inverter compressor drive
Communication failure between control board
and variable frequency fan drive
Indoor unit project number conflict warning
Outdoor unit number inconsistency warning
High rating capacity ratio
Low rating capacity ratio
Multiple controlling units
System address dial conflict
Multiple master wired controllers
Communication failure between the IDU and
receiving light board
IP address allocation overflow
GREE VRF Display Code (6)
The unit is not
commissioned.
After-sales refrigerant
recycling
Cooling and heating setting
Unit starting commissioning
confirmation
Remote emergency shutdown
Upper indoor/outdoor
capacity ratio
Indoor unit project
number enquiry
Cooling and heating
model
For example, when E4 is displayed on the ODU, find line E and column 4 in the above tables. The fault is
shown in the intersection of the line and column: High exhaust temperature protection.
Note: Previous faults in the system can be queried on the main board of the ODU and commissioning
software. See n6 Fault Enquiry of the ODU or enquiry function of the commissioning software for the
method.