Gree GMV-80WL/C-T

GREE DC Inverter Multi VRF System II Service Manual
108
Removal operation for blade
Remark: Before removing the motor, please make sure that the unit is disconnected with the power.
Process
Photo
Operation Instruction
2)
Remove
blade
● Loosen nuts fixing
the blade with wrench
● Then remove the
blade and put it on the
floor flatly
3)
Remove
motor
● Loose screws fixing
the motor with
screwdriver
● then remove the
power cord of motor
● Take out the
damaged motor
4)
Install motor
● Replace the motor,
tighten screws with
screwdriver and then
connect teh power
cord of motor