Multi Variable Air Conditioners Console Type Indoor Unit
14
4) This switch is useful when the remote controller is missing.
(15) Signal receiver:
1) It receives signals from the remote controller.
2) When the unit receives a signal, you will hear a short beep.
3) Settings changed beep.
(16) Air outlet selection switch.
It senses the air temperature around the unit.
NOTES!
①
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
②
The appliance shall be installed in accordance with national wiring regulations.
③
An all-pole disconnection switch having a contact separation of at least 3mm in all poles
should be connected in fixed wiring.
④
An all-pole disconnection switch having a contact separation of at least 3mm in all poles
should be connected in fixed wiring.
To Next Page
Loading...
