To Next PageTo Next Page
Need help?Do you have a question about the Gree GMV-ND22PHS/B-T and is the answer not in the manual?
General| Energy Efficiency Ratio (EER) Cooling | 3.5 |
|---|---|
| Energy Efficiency Ratio (Heating) | 3.8 |
| Power Supply | 380-415V/3Ph/50Hz |
| Refrigerant | R410A |
| Cooling Capacity | 22 kW |
Essential safety warnings, installation guidelines, grounding, and handling of specific components.
Safe operational practices, cleaning instructions, and precautions against damage or malfunction.
Guidance on responsible disposal of the product to prevent environmental harm.
Identifies main components and lists rated cooling and heating working conditions.
Details the standard accessories provided for the unit's installation.
Specifies necessary conditions and considerations for choosing an appropriate installation site.
Guides selection of communication cables for connecting indoor units to wired controllers.
Outlines necessary specifications for power cords and air switch capacity for safe operation.
Guidance on selecting communication cables for connecting multiple indoor units to the outdoor unit.
Details outline dimensions of the indoor unit and recommended installation spots for maintenance.
Step-by-step instructions and diagrams for drilling holes and fitting expansion bolts for unit installation.
Details requirements for installing the drainage pipe, including slope and diameter.
Detailed steps for installing the drain hose and connecting multiple drain pipes.
Detailed steps for installing the drain hose and connecting multiple drain pipes.
Outlines procedure for testing the drainage system to ensure no leaks occur.
Important considerations for air duct installation, including insulation and sealing.
Details dimensions for air outlet and air-return openings for various models.
Details dimensions for air outlet and air-return openings for various models.
Details installation of the return air duct, including default and alternative locations.
Details installation of the return air duct, including default and alternative locations.
Explains how to connect and install the fresh air pipe, including sealing and filtering.
Refers user to the Wired Controller User Manual for installation details.
Instructions on stripping wires and connecting them to terminals and patch boards.
Guides user on connecting the power cord, including safety precautions and circuit breaker requirements.
Details how to connect the communication wire between the indoor and outdoor units.
Details how to connect the communication wire between the indoor and outdoor units.
Explains how to connect the communication wire for the wired controller.
Illuminates connection of wired controllers to indoor units and network configuration.
Provides instructions for removing, cleaning, and drying the unit's filters.
Lists checks to perform before the seasonal use of the air conditioner.
Details steps to take after seasonal use, including drying and power management.
