Gree GMV-ND36PHS/B-T - Page 73

MULTI VRF-Ⅱ INDOOR UNIT SERVICE MANUAL EUROPEAN/LATIN AMETICA (R410A)
69
Setting
Code
Setting Content
Setting Value
 Heavy pollution: The first digit is "3". If the second digit is "0", it
indicates that the accumulated operating time is 100 hours. The
accumulated operating time is added by 100 hours when the second
digit is increased by "1". When the second digit is "9", the
accumulated operating time is 1000 hours.
n0
System conservation operation
settings
00: comfortability preferred
01: conservation preferred
n1
Defrosting period settings
40: 40 minutes
50: 50 minutes
60: 60 minutes
n3
Forcible defrosting
00: no defrosting
01: forcible defrosting
A7
Silent function of ODU
00: no silent function
01-09: intelligent nighttime silent mode
10-12: forcible silent mode
n4
Highest capacity output limitation
settings
08: highest energy consumption limitation being 80%
09: highest energy consumption limitation being 90%
10: no conservation limitation
5.4 Engineering Application Functions Operated through the YAP1F Remote Controller
The YAP1F remote controller only provides engineering application functions for setting the
master IDU. For other user operation functions, refer to the "Remote Controller Operating
Instructions".
The method for setting the master IDU through the YAP1F remote controller is as follows:
No.
Button name
Function
1
ON/OFF
Turn on or turn off the unit
2
TURBO
Set turbo function
3
MODE
Set operation mode
4
Set up&down swing status
5
I FEEL
Set I FEEL function
6
TEMP
Switch temperature displaying type on the unit’s display
7
Set health function and air function