Gree GMV5 Compact Series - Page 106

MAINTENACE 01040
GMV5 COMPACT MULTI VRF UNIT
SERVICE MANUAL
6、Connect suction
pipe and discharge
pipe of
compressor and
pipeline of system
again
 Weld the connection pipe
of compressor,connect the
pipeline and compressor
 Note: During welding
process, do not let flame
burn out other parts
7、 Connect the
power cord of
compressor well
 Loose screws fixing the
power cord with screw-
driver
 conenct the power cord
well again
 Note: When connecting the
power cord, make marks
for different color power
cords and corresponding
wiring terminals
8、Check and open
the upper cover
plate
 Check whether the pipeline
is connected well
 Check whetehr all parts
and connection wires are
connected well
 If there’s no problem after
checking, install front and
rear cover plates.
When
connecting the
power cord,
make marks for
different color
power cords and
corresponding
wiring terminals