Gree GMV5 Compact Series Service Manual

0 1900 CONTROL
GMV5 COMPACT MULTI VRF UNIT
SERVICE MANUAL
NO.
Symbols
Instructions
1
Up and down swing function
2
Left and right swing function
3
It's valid under Save mode and displays during setting process.Temperature lower
limit for Cooling: Limit the minimum temperature value under Cooling or Dry
mode.Temperature upper limit for Heating: Limit the maximum temperature value
under Heating, Space Heating or 3D Heating mode.
4
Auto mode (Under Auto mode, the indoor units will automatically select their
operating mode as per the temperature change so as to make the ambient
comfortable.)
5
It shows the setting temperature value(In case the wired controller is controlling a
Fresh Air Indoor Unit, then the
temperature zone will display FAP)
6
Cooling mode
7
Dry mode.
8
Fan mode
9
Heat mode
10
When inquiring or setting project number of indoor unit, it displays "NO." icon
11
Floor Heating mode (When Heating and Floor Heating simultaneously shows up, it
indicates 3D Heating is activated.)
12
Display "SET" icon under parameter setting interface
13
Space Heating mode
14
Display "CHECK" icon under parameter view interface
15
Outdoor unit operates under Save mode/upper limit of system capacitor less
100%/remote Save status
16
Sleep status
17
Current set fan speed (including auto, low speed, medium-low speed, medium
speed, medium-high speed, high speed and turbo seven status)
18
Air status

Gree GMV5 Compact Series Specifications

General

Brand	Gree
Model	GMV5 Compact Series
Category	Air Conditioner
Language	English