24
© Copyright, GREE Canada, 2021
<20.5"
5. Fix the rain shield on the support with 2 nuts, spring washer, washer and bolt.
Note: protective grille, support, rain shield, nut, bolt, spring washer and washer
optional accessories; some models are without these accessories.
6. Cut the sponge B to a proper length and attach it to the window sash.
7. Attach the window panel to the window stool.
7.1 If the inner width of the window is less than 20.5
"(520mm)
The window panel cannot be installed in windows less than 20.5"(520mm) wide.
(1) Remove the adjustment panel from the window panel, and cut the window
panel to the same width as the window.
(2) Open the window sash and place the window panel on the window stool.
(3) Secure the window panel to the window stool with 2 screws.
Nut
Spring washer
Support
Bolt
Screws
Screws
Cut
Window
panel
Window
stool
Adjustme
nt
panel
Window
panel
assembled
Nut
Spring washer
sponge B (adhesive)
Washer
To Next Page
Loading...
