Installation and Disassembly of Heat Discharge Pipe
Note of Installing heat discharge pipe
correct
wrong
● The length of the heat discharge pipe is less than 40 inches. It is recommended to
use it with shortest length.
the pipe or connect it with other
When installing,heat discharge pipe should be as flat as possible. Don’t prolong
heat discharge pipe.
29
The discharge pipe is suggested to be installed according to below figure by the manufacturer.
User can adjust the installation method of the discharge pipe basing on the requirement, while
the similar installation methods as below which will lead to unsmoothly air-out are not allowed.
under 51 inchs
about 24 inchs
To Next Page
Loading...
