6
Press this button and the mode will circulate according to below sequence:
COOL → DRY
FAN
→
→
COOL: Under this mode, cooling mode indicator is bright. Dual-8 nix syalpsid ebut ei
set temperature. Temperature setting range is 16
°C
~30
°C
.
DRY: Under this mode, drying mode indicator is bright. Dual-8 nixie tube won’t
display.
FAN: Under this mode, the air conditioner only blow fan. Fan indicator is bright.
Dual-8 nixie tube won’t display.
Mode button
3
Press this button and the fan speed will circulate as “low speed→ medium speed →
high speed→ auto fan→ low speed”.
Fan button
4
Operation Introduction for Control Panel
6
Sleep button
Press sleep button to enter into sleep mode. If the controller operates at cooling
mode, after sleep mode is started up, preset temperature will increase by 2°F(1°C)
within 1 hour ;preset temperature will increase by 4°F(2°C) within 2 hours and then
the unit will operate at this temperature all the time; Sleep function is not available
for fan mode, drying mode. If sleep function is started up, the upper indicator will
keep the display status. Others, it won’t be displayed.
5
Wifi button
After the unit is powered up, press WIFI button to turn on or off WIFI function.
Press and hold the button for 10s to reset WIFI function.
To Next Page
Loading...
