71
Maintenance
Service Manual
Screws
Screws
Nut
Washer 6
Washer 6 (at
washer)
Centrifugal blade
Motor Holder (Upper)
Motor
Evaporator
Step
Procedure
14.Remove
Motor
13.Remove centrifugal blade
15. Remove evaporator
Take out the nut, remove the
washer 6 and washer 6 (at washer)
and then take out the centrifugal
blade.
Remove 4 screws used for xing
the motor and then take out the
motor.
Remove 2 screws used for fixing
the evaporator and then take out
the evaporator.
To Next Page
Loading...
