Heat Pump Pool Heater
12
2.5 List of Accessories
The standard accessories are as follows. In the installation diagram, the
engineering loads or consumables such as valves and pipes shall be purchased
separately according to the actual use needs.
Tab. 2.5-1 Standard accessories
Name Number Specification or Diagram
Drainage pipe connection 1
Drainage pipe 1
Tapping Screw 1
Quick connector assembly 2
Chassis rubber plug(for GRS-CP11Pd/NhA-D) 2
Chassis rubber plug(for GRS-CP18Pd/NhA-D) 4
3 Installation
3.1 Installation Safety Precautions
Please read the instructions for use, installation and maintenance carefully
before use.
(1) For the product to be installed, moved and repaired, please contact the local
technical service personnel and seek the support of professional institutions.
Otherwise, our company may not be able to assume the relevant legal liability
in case of any damage.
(2) If the user uses self-prepared installation materials for installation, resulting in
pipeline leakage, crash, and bad installation affecting the normal operation
and use of the product, our company may not be able to assume the relevant
legal liability.
To Next Page
Loading...