Gree GRS-CQ10Pd/NhG-K - Page 44

Unit Control
FUNCTION Setting Page
★
2.
At the function setting page, by touching the page turning key, it will access to the last or next page.
When setting is finished, by touching the homepage icon, it will directly back to the homepage; by
touching the back icon, it will back to the upper menu.
★
3. At the function setting page, by pressing the desired function, it will access to the corresponding
setting page of this option.
★
4. At the function setting page of some function option, by touching ―OK‖, this setting will be saved; by
touching the ―CANCEL‖ key, this setting will be canceled.
[Notes]
●At the function setting page with setting of any function changed, if the function is set to be memorized
upon power failure, this setting will be saved automatically and memorized upon next power-on.
●When there is submenu for the selected function option, by pressing it the control will go directly the
setting page of the submenu.
Function Setting
No
Item
Range
Default
Remarks
1
Mode
Cool
Heat
1. When the water tank is unavailable, then only
―Cool‖ and ―Heat‖ are available.
2. For the heating only unit, only "Heat" mode, ―Hot
water‖, and ―Heat + hot water‖ are available.
Heat
Hot water
Cool + Hot water
Heat + Hot water
2
Fast hot water
On/Off
Off
1. When the water tank is unavailable, it will be
reserved.
3
Cool + hot
water
Cool/Hot water
Cool
1. When the water tank is available, it will be
defaulted to be ―Hot water‖; when unavailable, it will
be reserved.
4
Heat + hot
water
Heat/Hot water
Heat
1. When the water tank is available, it will be
defaulted to be ―Hot water‖; when unavailable it will
be reserved.
5
Quiet mode
On/Off
Off
6
Quiet timer
On/Off
Off
7
Weather
depend
On/Off
Off
8
Weekly timer
On/Off
Off
9
Holiday
On/Off
Off