ＳＷＩＮＧ ＦＡＮ
Names and functions of wireless remote control of each part
Note:
Be sure that there are no obstructions between receiver and wireless remote control.
Don't drop or throw the wireless remote control.
Don't let any liquid in the wireless remote control and put it directly under the
sunlight or any place where is very hot.
The wireless remote control signal can be received at the distance of up to about 10m.
SWING
button
When it is pressed, the
louvers start to swing at
the stated angle and stop
when repressed.
COOL mode
DRY mode
FAN mode
HEAT mode
FAN button
Press this button to change
the fan speed of:
AUTO FAN
ON/OFF button
Press this button, the unit
will start to run, when re-
pressed it, it will stop run-
ning.
ON/OFF
MODE button
Press this button to
change the operation
mode in order of:
AUTO
TEMP
. button
setting temp. will increased
1 ℃
When press button, the
,when press button,
the setting temp. will be
will be decreased 1℃．
In COOL mode, the temp.
could be adjusted in16℃
-30 ℃．
In DRY mode, the temp.
could be adjusted in16℃
-30 ℃．
In HEAT mode, the temp.
could be adjusted in16℃
-30 ℃．
To Next Page
Loading...