Inserting batteries
Insert two 7# batteries
Remove the cover from the back.
Re-attach the cover.
Remove the cover from the back,
and take out of the batteries.
Insert two batteries(two 7# dry-cell
batteries.)then press ACL button.
Re-attach the cover.
NOTE:
Don't mix new and used or different
types of two batteries to insert.
Remove batteries away when wireless
remote control is not in use.
The lifespan of the batteries is about1year.
Bad batteries are forbidden.
The remote controller should be placed about
1m or more away from the TV or any other elec-
tric appliances.
The max. receiving distance of wireless
remote controll is 10m.
Guide for operation procedure
The general procedure:
Plug to power supply and press ON/OFF button to start the unit.
Press MODE button to select the suitable operation mode.
Press SWING button, swing louver will swing automatically, repressed it , it will stop swing.
Press FAN button to set fan speed.
Press+/- button, to set the desired temperature.
The selected procedure:
Press SLEEP button to set the sleep.
Press TIMER button, then press +/- button, to set scheduled time.
To Next Page
Loading...