COOL mode operation
ON/OFF
P ress FAN speed to set fan
speed.
Press the button, to set the
desired temperature.
Press MODE button to
select mode.
P ress ON/OFF button, press once
could turn on the unit, when repress
to turn off the unit.
Press swing button, the gui-
de louver will swing automatic-
ally, when repressed, it will stop.
According to the indoor temp., setting temp., and the changes of indoor temp., the wireless remote control could control the outdoor
compressor, and output cooling capacity.
If the indoor temp. is equal to or higher than the setting temp., compressor will run in COOL mode.
If indoor temp. is lower than the setting temp., compressor stops running and indoor fan is running.
Under this mode, the temp. setting range is 16℃～30℃．
To Next Page
Loading...