Bird Dual-Split type
Bird Dual-Split Type
ON/OFF
Press the button to start the
FAN, and set the fan speed.
Press the SWING button,
swing louver will automatically
swing and when repressed the
button, it will stop to swing.
Press MODE buton to select
(COOL operation)
Press ON/OFF, unit will start
to run, when repressed, it will stop
running.
Press the buttons to adjust the
desired temperature.
When unit (cooling only type) receives the signal
of HEAT mode, unit will still run at the setting
mode.
HEAT mode operation
If indoor temp. is equal to or higher than setting temp., compressor will run in COOL mode.
The range of indoor temp. setting in COOL mode: 16℃-30℃.
If indoor temp. is higher than setting temp., compressor and outdoor fan motor will stop, only
indoor unit run at low speed. Guide louver will swing horizontally.
To Next Page
Loading...