Operation procedures/pictures
The disassembly procedure for 2300W,2600W outdoor units
Disassemble front side plate
Screw off 4pcs fixing screw of front side plate,
the n pull it downward, can take off it.
(As shown in Fig.8-15)
Disassemble the top cover
Screw off the screws which fix the top cover around,
take off the top cover.(As shown in Fig.8-16)
Dissassemble the rear grill
Screw off 4pcs bolt of rear grill, lift it upward,
could take off the rear grill.(As shown in Fig.
8-17)
Screw
Fig.
Fig.
Screw
Bolt
Fig.
To Next Page
Loading...