Gree GUD24W2/D-D(U) - Page 101

GREE DC INVERTER HEAT PUMP CONDENSING UNIT SERVICE MANUAL
98
Removal of Condenser
NOTE:Before removing the condenser, make sure there is no refrigerant in the pipeline and power is cut off.
Step Picture Work Instruction
9. Check and open the
upper and side panels.
 Check whether each
component and connection
wire is well connected.
 If everything is OK, place
back the upper, left and right
side panels.
Model: GUD42W2/D-D(U), GUD48W2/D-D(U), GUD60W2/D-D(U)
Removal of Condenser
Removing the condenser, make sure there is no refrigerant in the pipeline and power is cut off.
Step Picture Work Instruction
1. Remove the panels.
 Remove the upper, lower
and front panels.