GREE DC INVERTER HEAT PUMP CONDENSING UNIT SERVICE MANUAL
14
2.3.4 Set Indoor unit
The third dip switch is selecting the indoor unit.
The third dip switch is used to change the indoor unit setting, factory default setting is Air handler.
Defrost Mode Outdoor Unit Dip Switches
Air handler(Default)
2.3.5 Thermostat Functions
Thermostat model: XE70-00/E1,WK-010WA1,WK-010WB1. Please refer to the thermostat instruction
manual for all functions.
3 Troubleshooting
3.1 Wiring Diagrams
The following electric diagram is for reference only. Please refer to diagram sticked on the unit as the latest
version.
To Next Page
Loading...
