EasyManuals Logo

Gree GUD35PS/A-T User Manual

Gree GUD35PS/A-T
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
DC Inverter U-match Series Duct Type Unit
60
(4) If theres sound of liquid shock when the compressor is running, then stop
the air conditioner immediately. Wait until the electric heating belt is
heated enough, and then restart the air conditioner.
(5) Feel the air flow of the indoor unit to see if it is normal.
(6) Press the swing button or speed control button on remote control or wired
control to see if the fan can run normally.
NOTES
. If you use remote control to turn off the unit and then immediately turn the unit
on again, compressor will need 3min to restart. Even if you press ON/OFF
button on the remote control, it wont be started up right away.
. If theres no display on the wired control, its probably because the connection
wire between the indoor unit and wired control is not connected. Please check
again.
4 Installation of Controller
Refer to the wired controller or remote controller manual.

Other manuals for Gree GUD35PS/A-T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gree GUD35PS/A-T and is the answer not in the manual?

Gree GUD35PS/A-T Specifications

General IconGeneral
Cooling Capacity3.5 kW
Power Supply220-240V, 50Hz
Indoor Unit Dimensions (W x H x D)845 x 289 x 209 mm
Outdoor Unit Dimensions (W x H x D)720 x 495 x 270 mm
TypeSplit System
Cooling Capacity (BTU)12000 BTU
Energy Efficiency Ratio (Cooling)3.21

Related product manuals