Gree GUD50T/A-T - Page 101

GREE U-Match 5 SERIES UNIT SERVICE MANUAL
96
Removal of 4-way valve
Note: Before removing the 4-way valve, make sure refrigerant is fully discharged from the unit and power is cut off.
Step
Picture
Work instruction
4. Install the coil of 4-way valve.
●Tighten the screws of the coil of
4-way valve with a screwdriver.
Model: GUD100W/NhA-T, GUD125W/NhA-T, GUD140W/NhA-T,
GUD100W/NhA-X, GUD125W/NhA-X, GUD140W/NhA-X
Removal of fan and motor
Note: Before removing the fan, make sure power is cut off.
Step
Picture
Work instruction
1. Remove the grill.
●Use a screwdriver to unscrew the
two screws on the upper left and
lower right corners.
2. Remove the fan.
●Use a wrench to remove the
specialized nut and gasket of the
fan.
Note: Please keep the nut and
gasket safe after removing them
from the fan.