Gree GUD50T/A-T

GREE U-Match 5 SERIES UNIT SERVICE MANUAL
122
Removal of electric box assembly
Note: Before removal, make sure power is cut off. During the removal procedure, take good care of all the
components, especially the components in electric box. Protect it from water and collision.
Step
Picture
Work instruction
Remove the electric box.
●Unscrew 34 screws as
shown in the left picture
and then remove the
electric box.
Removal of air guide louver
Note: Before removal, make sure power is cut off. During the removal procedure, take good care of all the
components, especially the connectors of air guide louver.
Step
Picture
Work instruction
Remove the air guide
louver assembly.
●
Remove the air guide
louver from its
supporting assembly.
Then take off the
connectors from the
swing motor. (As
shown in the picture,
the lines indicate the
supporting assembly.)
Removal of water tray
Note: Before removal, make sure power is cut off. During the removal procedure, take good care of all the
components.
Step
Picture
Work instruction
Remove the water tray.
●
Remove the water tray.