Gree GUD71PHS1/A-S - Page 125

GREE U-Match 6 SERIES UNIT SERVICE MANUAL
122
Removal of compressor
Note: Before removing the compressor, make sure there is no refrigerant in the pipeline and power is cut off.
Step Picture Work instruction
2. Loosen the securing
screws at the foot of
compressor.
 Use a wrench to twist
off the screws at the
foot of compressor.
3. Break off the pipes that
connecting to the
compressor.
 Weld the pipes that are
connected to the
compressor.
 Then remove the pipes.
Note: When welding the
pipes, do not let the
flame burn the other
components.
4. Remove the compressor
from the chassis.
 Take out the
compressor and
replace it.
Note: When replacing
the compressor, avoid
touching the nearby
pipeline and
components.