Gree GUD71PHS1/A-S

GREE U-Match 6 SERIES UNIT SERVICE MANUAL
17
2.3 Functions
2.3.1 Setting of Filter Cleaning Reminder
Turn on Filter Clean Reminder Function: When unit is on, press “FUNCTION” button and select Filter
Clean Reminder. “
” icon will blink. Press “
＋
” or “
－
” button to adjust the cleaning level, of which the
range is 00, 10-39. Press “ENTER” to turn on this function.
Turn off Filter Clean Reminder Function: When unit is on and this function has been turned on, press
“FUNCTION” button and select Clean. Then “
” icon will blink. Set the cleaning level as 00 and press
“ENTER” function to cancel this setting.
When Filter Clean Reminder time is up, “
” icon will light up to remind you to clean the filter. There
are two ways to cancel filter clean reminding:
(1) Press “
” button twice within one second to cancel reminding and it will retime according to the
original cleaning level.
(2) Press “FUNCTION” button to turn to Filter Clean Reminder Function, then press “ENTER” to
cancel reminding, and it will retime according to the original cleaning level. The clean reminding
can be cancel only when you didn’t reset the cleaning level under the setting of Filter Clean
Reminder Function.
Cleaning Level
Accumulated
Operating Time
(hour)
Cleaning Level
Accumulated
Operating Time
(hour)
Cleaning Level
Accumulated
Operating Time
(hour)
10 5500 20 1400 30 100
11 6000 21 1800 31 200
12 6500 22 2200 32 300
13 7000 23 2600 33 400
14 7500 24 3000 34 500
15 8000 25 3400 35 600
16 8500 26 3800 36 700
17 9000 27 4200 37 800
18 9500 28 4600 38 900
19 10000 29 5000 39 1000
2.3.2 Low-temperature Drying Function
Under dry mode, when the setting temperature is 16
℃
, press “
－
” button for twice, the setting
temperature becomes 12
℃
, then the unit enters into low-temperature dry function.