Function Buttons and Displayer
8
Note:
Note:
After the function is selected by Function
button, if the unit is not turned off and there
is no remote signal, the function will circulate
from last selected function when pressing the
Function button within 2min; the function will
circulate from the first function icon when
pressing the Function button after 2min or
turn off the unit or there is remote signal.
display
Slide bar
button
Speed button
●
Under unit off status, press Function button
to turn off the unit in X-fan running status;
when the unit is off and without X-fan running,
press Function button to set timer. When the
timer icon is blinking, touch slide bar to set
timer. If there is no operation within 5s after
finishing setting, the setting will be confirmed.
The setting can be confirmed also by pressing
Function button.
●
Press Speed button to change the fan
Quiet and turbo function are set by Speed
button. Quiet and turbo function are not
available in dry, fan and auto mode. Quiet
function is not available in heating mode.
The fan speed is low in dry and auto dry
mode. The fan speed is not adjustable and
fan speed button is invalid.
speed as below:
Function button
Auto
Quiet
Low
Medium-low
Medium
Medium-highHighTurbo
●
Function button
Under unit on status, press Function
button to switch function in the seq-
uence of auto, dry, fan,
(ECO
-WIND),
setting, room temp., timer.
When the
function icon is blinking, it
means this
function can be set through
slide
bar button. If there is no operation
within
5s after finishing setting, the
setting will be confirmed. The
setting can be confirmed also by
pressing Fun-ction button.
To Next Page
Loading...
