43
Installation of anti-tilting chain
● In order to prevent tilting due to an accident, please install the anti-tilting chain.
Installation steps:
1. Remove the screw in the anti-tilting hole at the top cover of indoor unit (see
Figure 1).
2. Take out the anti-tilting chain from the accessories; put it into the anti-tilting hole
and then fix it with screw (see Figure 2).
3. Fix the other end of anti-tilting chain on the wall with screw(ST4.2X38) (see
Figure 2).
Actual product may be different from above graphics, please refer to actual
products.
wall
screw
anti-tilting hole
anti-tilting
chain
To Next Page
Loading...
