19
Operation Method
Up&down wind direction adjustment
● Press " " button on remote controller or " " on control
panel can select up&down swing method, and control the
operation and stop of up&down swing motor to let swing
blade rotate up&down or stop at a certain angle to blow
wind.
● If indoor fan is operating, as for each pressing of " " bu-
tton on remote controller, please refer to the part of instru-
ction of remote controller for swing method for details.
● Press " " button on remote controller can turn on or turn
off up&down swing. Press this button once to turn on sw-
ing function and press it again to turn off swing function.
● When swing function is turned off, the characters and icon
of up&down swing on remote controller or display will dis-
appear; when selecting other status, swing characters and
icon will display.
● Cooling, drying ─ Set to blow wind at front side or blow
wind upwards in general.
When turning on the unit, you can select to blow wind do-
wnwards to decrease temperature around people quickly.
However, it can’t keep blowing wind downwards for a long
time
to make sure good air ventilation of indoor air.
● Heating ─ Set to blow wind downwards in general.
Up&down swing
blade (horizontal)
Up&down swing
blade (upwards)
(can set or )
Up&down swing
blade (upwards)
(can set or )
To Next Page
Loading...
