87
Installation and Maintenance
Service Manual
Step Procedure
13. Remove the compressor
Unsolder the pipes connected to the compressor and
liquid tank. Remove the 4 foot bolts of the compressor.
Raise the liquid tank and compressor to remove them.
14. Remove the isolation sheet
Remove the screws connecting the isolation sheet
with the right side plate of condenser and the chassis.
Remove the isolation sheet.
15. Remove condenser subassembly
Remove the screws connecting the condenser and the
chassis. Raise the condenser subassembly to remove
it.
liquid tank
compressor
isolation sheet
condenser
subassembly
To Next Page
Loading...
