86
Installation and Maintenance
Service Manual
Step Procedure
10. Remove left side plate
Remove the screws fixing the left side plate and the
chassis, and then remove the left side plate.
11. Remove 4-way valve assy or capillary sub-assy/
electronic expansion valve assy
Unsolder the spot weld of capillary sub-assy(electric
expansion valve sub-assy) and condenser, and then
remove the capillary sub-assy(electric expansion valve
sub-assy).
Note:
When unsoldering the spot weld, wrap the capillary
sub-assy(electric expansion valve sub-assy) with wet
cloth completely to avoid damaging the valve due to
high temperature.
12. Remove condenser sub-assy
Remove the screws xing the condenser and chassis,
and then lift the condenser upwards to remove it.
left side plate
screws
4-way valve assy
electronic
expansion
valve assy
condenser sub-assy
screws
Capillary
Sub-assy
To Next Page
Loading...
