Gree GWC18KG-K3DNA6A

94
Removal Procedure
The screw has reverse
winding.
Front panel
Propeller fan.
Lift the front panel and
remove it while pushing the
right side panel inwards.
Step Procedure Points
Right Side Plate
Twist off the screws fixing
the panel and then remove
the panel.
Twist off the screws fixing
the panel, pull it upward,
loosen the clasp on the
right side, rotate it to the
left and then remove the
panel.
Remove right side plate
Twist off the screws fixing
the right side plate and end
plate of condenser and
valve support, pull it
upward and then remove
the right side plate
sub-assy.
Remove
the
axial flow
blade
Twist off the nut fixing the
blade with wrench and the
draw out the axial flow
blade.
Remove panel