To Next PageTo Next Page
Need help?Do you have a question about the Gree GWH(12)MB-K3DNA3B and is the answer not in the manual?
General| Type | Split Type |
|---|---|
| Cooling Capacity | 12000 BTU/h |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Power Supply | 220-240V/50Hz/1Ph |
| Refrigerant | R410A |
| Outdoor Noise Level | 52 dB(A) |
| Heating Capacity | 13000 BTU/h |
Essential warnings and cautions for safe operation and installation.
Detailed technical parameters and dimensions for various unit models.
Graphical representation of noise levels at different fan speeds.
Diagrams and a table illustrating the physical dimensions and layout.
Schematic showing the refrigerant flow and components for cooling and heating.
Key for understanding electrical symbols and color codes used in wiring.
Diagrams illustrating the electrical connections for the units.
Top and bottom views of the PCB with component identification.
Guide to the functions and buttons of the remote controller.
Detailed explanation of each operation mode and function.
Important guidelines and safety precautions before starting installation.
Recommended locations and clearances for unit installation.
Step-by-step instructions for mounting the indoor unit and connecting pipes.
Procedures for verifying correct installation and initial operation.
Instructions for installing and maintaining the healthy filter.
Visual breakdown of the indoor unit with numbered parts and descriptions.
Explains how malfunctions are displayed and lists common error codes.
Step-by-step guides for diagnosing and resolving specific malfunctions.
Steps for removing the air filter and horizontal louver.
Instructions for removing the front panel and electric box covers.
Steps to detach and remove the front case of the unit.
Procedures for removing vertical louvers and the main electric box.
Steps for removing pipe clamps and the evaporator assembly.
Instructions for removing the cross flow fan blade and motor assembly.
