42
Removal Procedure
erudecorPspetS
Remove connection screws of evaporator
assy and motor clamp. Release clasps
connecting evaporator assy to rear case. Then
remove evaporator assy.
7. Remove electric box assy
8.Remove evaporator
Unplug indoor temp sensor.
Remove connection screws of electric box
assy and rear case. Release clasps and
remove connection screws of earthing wire
and evaporator assy. Then remove electric
box assy.
Turn over the rear case assy and remove
connecting pipe clamp. Release clasps
between connecting pipe clamp and rear case
assy. Then remove connecting pipe clamp.
2
1
1
2
Pipe Clamp
Indoor Temp Sensor
Electric Box Cover
Electric Box Assy
Auxiliary Piping
Evaporator Assy
To Next Page
Loading...