Gree GWH(12)RB-K3DNA1A/I - Page 45

43
Removal Procedure
erudecorPspetS
Removal of connection screws connecting
cross flow fan to motor shaft. Then remove
the motor.
9.Remove cross flow fan and motor
Remove screws of step motor and then
remove the motor.
Remove 4 connection screws of motor clamp
and rear case. Then remove motor clamp.
Remove ring of bearing sub-assy.
2
4
1
5
Remove cross flow fan and motor.3
Step Motor
Motor Clamp
Ring of Bearing
Cross Flow Fan
Fan Motor
O-Gasket Sub-assy of Bearing