85
Installation and Maintenance
Service Manual
fan motor fixing frame
4. Remove fan motor and axial flow blade
5. Remov e electric box
Remove the scre ws fixing the electric box
sub-assy; loosen the wi re bundle; pull out
the wi ring terminals and then pull the
electric box upwards to remove it.
Remove the 4 tapping screws fixing the
motor; disconnect the leading wire insert of
the motor and then remove the motor.
Remove the 2 tapping screws fixing the
motor support and then pull the motor
support upwards to remove it.
electric box
fan motor
axial flow blade
Remove the nuts fixing the blade and then
remove the axial flow blade.
a
b
Steps Procedure
To Next Page
Loading...
