69
Installation and Maintenance
Service Manual
Step Procedure
4. Remove rear case assy
Hold the clasps at both sides of drainage pipe and
pull it downwards to let the drainage pipe separate
from the bottom case.
(1)Remove the nger guard grille. Press the claps
at the top of the guard grille and then pull the nger
guard grille upwards to remove it.
(2)Loose the screws (2-3 circles) used for xing the
blade, pull the blade to the left side until it can’t be
pulled any more.
(3)Remove 4 screws used for xing the bottom
case.
Press the concave position marked with red circle
with your thumb forcibly, lift the bottom case and
then pull it outwards.
Claps
(1)
(2
To Next Page
Loading...
