70
Installation and Maintenance
Service Manual
Step Procedure
5.Remove panel
Push the panel to the right side, pull the left side of
panel upwards to loose the clasp at the left side,
push the panel to the left and pull it upwards to
loose the clasp at the right side, and then remove
the panel. Remove the screws used for xing the
display board and then remove the display board.
6. Remove Decorative borad(Left) and Left side plate
Press the clap at the top of the left decorative board
and turn it over. Once the top part is separated, lift
it upwards and then remove the decorative board.
Remove 2 screws used for xing the left side
panel, extend your hand to the handle and press it
upwards forcibly to let the claps at the top part of
the left side plate be separated. Pull the left side
plate outwards to remove it.
7.Remove Decorative borad(Right) and Right side plate
Remove the right decorative board by the method
as above.
Remove the screws used for xing the right side
plate, and then remove it.
Panel
Display
Screws
Botton
Decorative Borad
Left Side Plate
Screws
Handle
Clasp
Screws
To Next Page
Loading...
