57
Installation and Maintenance
Service Manual
Some models may not contain some parts, please refer to the actual product.
NO. Description
1 Front Panel
2 Sensor Sub-assy(HUMAN BODY INDUCTION METER)
3 Guide Louver
4 Decorative Board Sub-assy
5 Seal Cap(terminal)
6 Screw Cover
7 Right Driving Box Sub-assy
7.1 Stepping Motor
7.2 Connecting Rod Sub-assy
8 Holder (terminal)
9 Wire Clamp
10 Electric Box 3
11 Magnetic Ring
12 Electric Box 2
13 Main Board
14 Electric Box 1
15 Sweep Motor Assembly (right)
15.1 Stepping Motor
16 Air Louver(right)
17 Left Side Plate
18 Mouseproof Board
19 Fan Motor
20 Motor Press Plate
21 Connecting pipe clamp
22 Electric Heater
23 Wall Mounting Frame Sub-assy
24 Evaporator Assy
25 Into The Grid
26 Filter Sub-Assy
27 Evaporator Support
28 Cross Flow Fan
29 Axile Bush Sub-assy
30 Rear Case Sub-Assy
31 Right Side Plate
32 Air Louver (left)
33 Sweep Motor Assembly (left)
33.1 Stepping Motor
34 Air Louver (Middle)
35 Front Case
36 Left Driving Box Sub-assy
36.1 Stepping Motor
37 Detecting Plate
38 Display Board
39 Pinboard
40 Seal Cap(HUMAN BODY INDUCTION board)
41 Connecting Cable
42 Connecting Cable
43 Remote Controller
To Next Page
Loading...
