63
Installation and Maintenance
Service Manual
Step Procedure
3. Remove lter assy
Hold the two places (as shown in the right gure)
of lter sub-assy with two hands, pull it backwards
and then turn it upwards to unclose the lter sub-
assy; separate the clasp of lter sub-assy and then
remove it.
4.Remove front case assy
Remove the screws xing front case.
Note:
(1) Open the screw caps before removing the
screws around the air outlet.
(2) The quantity of screws xing the front case
subassy is different for different models.
Remove the screw xing the terminal sealing
cover; remove the sealing cover; disconnect the
left drive box terminal, display terminal and right
drive box terminal.
Filter Assy
Left drive box terminal
Display terminal
Right drive box terminal
Screw caps
Screw
Screws
Sealing cover (terminal)
To Next Page
Loading...
