Need help?Do you have a question about the Gree GWH09MB-K3DNA3K/I and is the answer not in the manual?
General| Model | GWH09MB-K3DNA3K/I |
|---|---|
| Cooling Capacity | 9000 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Dimensions (WxHxD) | 773x250x185 mm |
| Outdoor Unit Dimensions (WxHxD) | 732x555x330 mm |
| Type | Split |
| Noise Level (Outdoor) | 50 dB |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Operating Temperature (Heating) | -7°C to 24°C |
Crucial safety instructions covering installation, operation, and maintenance to prevent hazards.
Comprehensive data on electrical, capacity, and physical characteristics of the units.
Diagram showing the path of refrigerant and the arrangement of components like the compressor and valves.
Explains the purpose and operation of each button on the remote control.
In-depth description of how cooling, heating, and dehumidifying modes function.
Details common protection mechanisms, fault displays, and their likely causes.
Important preliminary instructions, warnings, and regulatory compliance information for installation.
Guidelines for safe electrical connections, including grounding and circuit protection.
Specifies the correct procedures and standards for grounding the unit.
Detailed instructions for physically mounting and preparing the indoor unit.
Instructions for installing the outdoor unit and making electrical connections.
Essential steps for removing air from the system and checking for refrigerant leaks.
Checklist and procedure for verifying correct installation and performing initial operation tests.
A systematic approach to diagnosing and resolving common operational problems.
Correlation of flashing LED patterns with specific malfunctions and potential causes.
To Next Page
