Gree GWH09TB-D3DNA1A - Page 10

8
●
●
Operation of wireless remote controller
SLEEP BUTTON
Press this button, can select Sleep 1 ( ), Sleep 2 ( ),
Sleep 3 ( ) and cancel the Sleep, circulate between
these, after electrified, Sleep Cancel is defaulted.
Sleep 1 is Sleep mode 1, in Cool, Dehumidify modes: sleep status
after run for one hour , the main unit setting temperature will
increase
,
run at this setting temperature; In Heat mode: sleep
status after run
for one hour, the setting temperature will decrease
1 F～
2 F
,
2
hours, setting temperature will decrease 3 F～4 F,
then the unit will
run at this setting temperature.
●
Sleep 2 is sleep mode 2, that is air conditioner will run according to
the presetting a group of sleep temperature curve.
In Cool mode:
(1) When setting the initial temperature 61 F～74 F , after turned on
Sleep function, the temperature will be increased 1 F～2 F in every hour,
after 5 F ～6 F ,sruoh7 retfa ,deniatniam eb lliw erutarepmet eht
the temperature will be decreased
1 F～2 F
1 F～2 F
75 F～81 F
,
after that the unit will
kee
p on
running under this temperature;
(2) When setting the initial temperature
, after turned
on Sleep function, the temperature will be increased
1 F～2 F in every hour ,
after 3 F～4 F the temperature will be maintained, after 7hours,
the temperature will be decreased ,
after that the unit will
keep on running under this temperature;
(3) When setting the initial temperature
82 F～85 F , after turned
on Sleep function, the temperature will be increased 1 F～2 F
in every
hour, after the temperature will be maintained, after 7hours,
the temperature w
ill be decreased , after that the unit will
keep on running under this temperature;
(4) When setting the initial temperature 86
F , under this temper-
ature setting, after 7hours, the temperature will be decreased
after that the unit will keep on running under this temperature;
In Heat mode:
(1) Under the initial presetting temperature 61
F , it will run under
this setting temperature all along.
(2) Under the initial presetting temperature
62 F～68 F , after Sleep
function started up, the temperature will decrease in every
hour, after
decreased, this temperature will be maintained.
SLEEP
Name and function of wireless remote controller
setting temperature increased
,
the unit will
3 F～4 F
1 F～2 F
1 F～2 F
1 F～2 F
1 F～2 F,
1 F～2 F,
1 F～2 F,
2 hours,