93
Installation and Maintenance
Service Manual
Procedure
Step
Cutting the pipeline of welding the gas valve
and the liquid valve, Remove the screws
xing the valves, remove the gas valve and
the liquid valve.
Note:
When cutting weld, wrap the valve with wet
cloth completely to avoid damaging the valve
due to high temperature.
13. Remove gas valve and liquid valve
14. Remove valve support
Valve support
Screw off the screws xing the valve
support and then remove the valve support
Liquid valve
Gas valve
Screws
Screws
Screws
4-way valve assy
Capillary
sub-assy
15. Remove 4-way valve assy
Cut off the welded pipe of the 4-way valve
component to the condenser assy and
compressor, and then remove the 4-way
valve.
Note:
When cutting weld, wrap the 4-way valve
with wet cloth completely to avoid damaging
the valve due to high temperature.
To Next Page
Loading...
