87
Installation and Maintenance
Service Manual
a
b
motor support
motor
4. Remove fan motor
5. Remov e electric box
Remove the scre ws fixing the electric box
sub-assy; loosen the wi re bundle; pull out
the wi ring terminals and then pull the
electric box upwards to remove it.
Remove the 4 tappin g screw s fixing the
motor; disconnect the leading wire insert of
the motor and then remove the moto r.
Remove the 2 tappin g scre ws fixing the
motor support and then pull the motor
support up wa rds to remove it.
Remove the nuts fixing the blade and then
remove the axial flow blade.
axial flow blade
electric box
To Next Page
Loading...
